Booth brand • Spraybake
Spraybake Paint Booth Filter Fitments
Spraybake's UK origin shows up across the US installed base in pockets where partner distribution carried the brand, most visibly in the Washington I-5 corridor, but also in scattered installations across the Northeast and parts of the West. Authorized-distributor records show repeated "Spray Bake Temp" service patterns from these installations, confirming the integrated burner plus cure-cycle control system that defines the brand. We stock verified fitments for the Spraybake models still operating with replacement-filter demand intact.
Quick answer
Spraybake, UK-design paint booths with US distribution via partners, is recognizable across authorized-distributor records under both "Spray Bake" and (informally) "Spray Tech booth" naming. Common in the Washington I-5 corridor and other markets where UK-design units arrived through partner distribution. Integrated burner plus cure-cycle controls are typical. Documentation is sparse publicly; verified fitments come from authorized-distributor parts cross-references.
How shops choose Spraybake filters
Spraybake booths follow UK downdraft design conventions with integrated burner and cure-cycle handling, the booth and oven cycle on the same control system rather than separate equipment. Filter slot geometry for the standard Spraybake collision booth follows the standard downdraft pattern: intake-ceiling diffusion plus exhaust-pit arrestor media. The integrated cure cycle adds AMU pre-filter handling tied to the burner staging. Verified fitments in our catalog reference the Spraybake parts catalog through authorized-distributor cross-references.
Regulatory landscape
Spraybake installations face standard US regulatory layers, state DEP authority plus regional AQMDs (notably PSCAA in Washington's WA I-5 corridor), plus federal OSHA spray-finishing standards. UK-origin capture-efficiency documentation maps to US requirements when the original equipment specification is matched. Older Spraybake installations may have lost the original installation manuals (the brand historically shipped manuals with the unit only, with limited public documentation). Our verified-fitment kits include the relevant capture data per the original equipment build.
Who runs Spraybake booths
Spraybake installations in the US concentrate in two populations. First, the Washington I-5 corridor, collision and finishing shops from Vancouver WA through Bellingham, plus the broader Puget Sound territory where partner distribution placed the brand. Second, scattered installations across the Northeast and select Western markets where UK-design units arrived through specific dealer relationships. New US installations are uncommon; replacement-filter demand drives the catalog focus.
Industries served: automotive_refinish · commercial_vehicle
Spraybake filter FAQs
Is Spraybake the same as "Spray Bake" or "Spray Tech booth"?
The brand is correctly "Spraybake" or "SprayBake Limited" of the UK. Authorized-distributor records include both spellings as well as "Spray Tech booth" as a colloquial reference — these all refer to the same UK-origin brand in most field encounters.
Why does my Spraybake have integrated burner controls?
Spraybake's UK design integrates the booth and the cure-cycle oven into a single control system rather than two separate pieces of equipment. This is a design difference from most US-origin brands. The integration is reliable when properly maintained but adds complexity to mechanical service calls; filter selection remains straightforward.
Where can I find Spraybake filter specifications?
Spraybake's documentation distribution has historically been UK-dealer-channel with US distribution through partners. Public documentation is limited. Our verified fitments come from authorized-distributor parts cross-references; source_confidence is "distributor-cross-ref" pending field verification or manufacturer confirmation through the partner distribution network.
How often should I replace filters on a Spraybake?
Independent collision shops on Spraybake typically run intake every 40-55 days and exhaust every 85-115 days under normal volume. Pacific Northwest humidity in the WA I-5 corridor compresses the wet-side cycle further. Subscriptions auto-tune by ZIP.
What if my Spraybake is older than your verified-fitment list?
The Filter Finder accepts photos for older Spraybake installations and matches against the closest verified fitment family. Most pre-2010 Spraybake booths still on the floor have direct fitment matches in the documented modern equivalents.
How do I get the original Spraybake installation manual if I've lost mine?
Through the US distribution partner network. Spraybake Limited in the UK can route documentation requests through their North American partners. Our filter purchases include the relevant capture-efficiency data for your verified booth model regardless of whether you've retained the original install manual.
Related on BoothFilterPro
- Advantage / Advantage 2000
downdraft booth
- Performance
downdraft booth
- Spraybake legacy booth
Pick your booth
Which Spraybake model do you have?
Click the booth that looks like yours to see its filter kit. Not sure? Match the airflow direction in the diagram against your booth.
DowndraftAdvantage / Advantage 2000
Downdraft
- Downdraft
Performance
Downdraft
- Booth
Spraybake legacy booth
Not finding the right match?
We carry many filters beyond what's shown here. Tell us about your booth and we'll send you a price and ship ETA within one business day.
Don't see your Spraybake model? Tell us about it →