Saima · Downdraft
Saima Saima Accudraft Paint Booth Option 1
Filter kit, alternatives, and current pricing for the Saima Accudraft Paint Booth Option 1.
Required filters
Recommended kit for this booth
3 matched filters across 3 slots.
Complete kit total · $1498.41
Intake side (clean air going in) (1 slot)
Ceiling intake
Ceiling diffusion polyester · 37x45
Special order · 1–2 weeksFiltrair FF560GX 37x45 Ceiling Diffusion (PA560G-10), Saima Accudraft Old
BFP-CD-FILTRAIR-FF560-3745· 30–60 day cycle$917.04
Exhaust side (overspray coming out) (2 slots)
Exhaust Cube
Cube overspray arrestor · 15x24x20
Special order · 1–2 weeksAFT Sewn Exhaust Cube 15x24x20
BFP-EC-AFT-1524· 7–14 day cycle$260.30
Pit exhaust
Fiberglass exhaust arrestor · 30x300ft
Special order · 1–2 weeksAFT 22-gram Fiberglass Roll 30x300ft
BFP-FG-AFT-22G-30R· 7–14 day cycle$321.07
Not finding the right match?
We carry many filters beyond what's shown here. Tell us about your booth and we'll send you a price and ship ETA within one business day.
Don't see your filter? Request a quote →Saima model • Saima Accudraft Paint Booth Option 1
Saima Saima Accudraft Paint Booth Option 1 Filter Fitments
Saima Meccanica and Accudraft have a long-standing co-distribution relationship for the US market, certain Saima downdraft booths ship under the Accudraft brand for North American customers while retaining the original Italian engineering. Option 1 is the entry tier of this co-branded configuration set, common in independent collision and dealer body shops that bought through Accudraft's US dealer network during the period when Saima/Accudraft co-branding was active. We stock verified intake and exhaust kits matched to Option 1's published airflow and slot dimensions.
Quick answer
The Saima Accudraft Paint Booth Option 1 is a Saima Meccanica downdraft booth sold under the Accudraft co-branding for the US market, the entry tier of the co-distributed configuration set. Italian engineering from Arezzo with US distribution through Accudraft. Filter kit selection draws from the verified Saima downdraft family adapted to the Option 1 specification. Source confidence is authorized-dealer cross-reference, kit ships with quote-back form to upgrade to field-verified before subscription auto-renews.
How Saima Accudraft Paint Booth Option 1 shops choose filters
Intake side. Option 1 uses Saima's pressurized ceiling-diffusion plenum with European-spec polyester or fiberglass diffusion media. The Accudraft co-branding preserved the underlying Italian design, so the ceiling panel grid and slot dimensions match the direct-Saima downdraft pattern. AMU pre-filter cycle on Option 1 typically runs 60-90 days; ceiling diffusion media cycles 30-60 days depending on production tempo.
Exhaust side. Pit-mounted exhaust pad media, Option 1's exhaust-pit slot configuration matches the smaller Saima downdraft pattern. Catalog kit defaults to fiberglass arrestor pad with polyester arrestor as the upgrade path for higher-solids or waterborne work. The 25-entry filter media taxonomy on this site distinguishes the 12 exhaust types (fiberglass-arrestor, polyester-arrestor, accordion-paper, paper-mesh, pocketed-paper, cube-overspray-arrestor, tower-exhaust-pocket-bag, plus five more), 9 intake types, and 4 specialty types, Option 1's verified-fitment kit names the specific media-type slug per slot.
Slot expectations are queued for re-mapping. A note on transparency: the booth-model slot expectations row for Option 1 is flagged in the verification queue as pending re-mapping against the new 25-entry media taxonomy (the platform expanded from 9 to 25 media types on 2026-05-09). The kit you receive is correct, we're updating the metadata record, not the physical fitment.
Cycle math. Intake-ceiling at 30-60 day cycle; AMU pre-filter at 60-90 day cycle; exhaust-pit pad at 7-14 day cycle for high-production collision, 21-30 day cycle for lower-volume.
Regulatory landscape
Option 1 installations run under regional AQMD or state-DEP authority for VOC and HAP control plus federal OSHA spray-finishing standards (29 CFR 1910.94). NESHAP Subpart HHHHHH 6H Area Source documentation is the typical compliance layer for independent collision sites. Subscription delivery records produce the maintenance log auditors expect. Co-branded original-equipment paperwork may carry either Saima or Accudraft naming on the capture-efficiency documentation; both are valid for the same underlying booth.
Who runs the Saima Accudraft Paint Booth Option 1
Three populations carry the Saima Accudraft Option 1 in the US installed base. First, independent collision shops that bought through Accudraft's US dealer network during the co-distribution years and may not even be aware their booth is Italian-engineered. Second, dealer body shops that purchased through Accudraft for service-loaner and warranty-collision work. Third, multi-shop operators where the Accudraft co-branding was the standardization choice across multiple locations.
Saima Accudraft Paint Booth Option 1 filter FAQs
Why is this booth listed under Saima when my paperwork says Accudraft?
The booth is engineered and built by Saima Meccanica in Arezzo, Italy, then sold under Accudraft's co-branding for the US market. The underlying design is Saima's; the US distribution and customer-facing brand is Accudraft. We list it under Saima's brand entry because the engineering source is Saima, the Filter Finder routes you to the right fitment regardless of which brand label your paperwork or nameplate carries.
What's the source confidence on this fitment?
**Distributor-cross-ref (authorized-dealer cross-reference), kit ships with quote-back form to upgrade to field-verified.** Kit dimensions and slot count come from authorized-dealer parts cross-references covering both the direct-Saima and Saima/Accudraft co-distribution catalogs. The first kit shipment includes a measurement quote-back form so your in-shop measurements upgrade the record before subscription auto-renews.
Are filters interchangeable between direct-Saima Option 1 and Saima/Accudraft Option 1?
Yes. The co-branding preserved the Italian design including all slot dimensions and AMU configuration. Filters fit identically across the direct-Saima and Saima/Accudraft co-distribution Option 1 booths.
My documentation is in Italian, is that normal even though it's Accudraft-branded?
The Italian-original technical documentation is the engineering source; the US-channel manual is typically Italian-translated and may be co-branded with Accudraft. Manuals_language is 'italian-translated' regardless of which brand the dealer-channel manual carries on its cover page.
Where do I source replacement Accudraft documentation if I've lost mine?
Through the Accudraft US dealer network. Accudraft North America handles co-branded documentation requests for the Saima/Accudraft installed base. Our filter kits ship with the relevant English-composed capture-efficiency data regardless of whether you've retained the original Italian-translated install manual.
What if my booth has burner or mechanical faults?
Mechanical service requests, burner faults, AMU motor issues, control-system faults, route to professional service. Filter selection on this fitment family stays unchanged regardless of mechanical service status.
Sources
Primary references cited on this page.
- Saima Meccanica (Arezzo, Italy)https://www.saimameccanica.com/en/saima-meccanica/
- Authorized-Dealer Parts Cross-Reference (authorized-dealer cross-reference)internal:distributor-cross-ref-2026-04
Related on BoothFilterPro
- All Saima models
Brand hub
- 2000 Maxidraft Option 1
Sibling Saima model
- 2000 Maxidraft Option 3
Sibling Saima model
- Spraykleen
Sibling Saima model
- PREPKLEEN
Sibling Saima model
- BETA
Sibling Saima model